| Step | | Procedure & Parts & Tools |
| 1 |
|
REMOVE THE POWER CORD FROM THE CORD HOOK.
|
| 2 |
|
UNHOOK THE VAC HOSE FROM THE HOSE HOOK.
|
| 3 |
|
SLIDE UP ON THE BAG COVER LATCH. PULL THE BAG COVER FROM THE MACHINE.
|
| 4 |
|
PUSH IN ON THE RED LEVER TO UNLOCK THE BAG.
|
| 5 |
|
PULL THE BAG DOWN OFF THE INTAKE HOSE.
|
| 6 |
|
LOCATE THE 5 SCREWS ON THE BACK OF THE VAC (VISIBLE AFTER REMOVING THE BAG). REMOVE THE 5 SCREWS.
| Screwdriver-phillips |
|
|
| 7 |
|
REMOVE THE SCREW HOLDING THE BRUSH TOOL HOLDER.
| Screwdriver-phillips |
|
|
| 8 |
|
PULL TO REMOVE THE HANDLE ASSEMBLY FROM THE VAC
|
| 9 |
|
LAY THE HANDLE ASSEMBLY DOWN AND REMOVE THE 4 SCREWS
| Screwdriver-phillips |
|
|
| 10 |
|
REMOVE THE BACK PANEL ON THE HANDLE ASSEMBLY
|
| 11 |
|
SLIDE THE COVER OFF THE CONNECTOR AT THE BOTTOM OF THE HANDLE.
|
| 12 |
|
INSERT 1 LEAD INTO THE GREEN/YELLOW WIRE AT TERMINAL BLOCK.
| Volt meter (True RMS capable) |
&Width=100)
|
|
| 13 |
|
WITH THE OTHER LEAD, TOUCH THE WIRE CONNECTOR OF THE GREEN/YELLOW WIRE AT THE CONNECTOR. SET THE VOLT METER TO CONTINUITY. IF THE VOLT METER BEEPS, THE WIRE IS OKAY.
| Volt meter (True RMS capable) |
|
|
| 14 |
|
LOCATE THE BLUE WIRES ON THE SWITCH. INSERT 1 LEAD INTO THE WIRE CONNECTOR OF ONE OF THE BLUE WIRES.
| Volt meter (True RMS capable) |
|
|
| 15 |
|
TRACE THE BLUE WIRE TO THE CONNECTOR AT THE BOTTOM OF THE HANDLE. TOUCH THE WIRE CONNECTOR OF THE BLUE WIRE AT THE CONNECTOR. SET THE VOLT METER TO CONTINUITY. IF THE VOLT METER BEEPS, THE SWITCH IS OKAY. REPEAT STEP 14 AND 15 FOR THE OTHER BLUE WIRE.
| Volt meter (True RMS capable) |
|
|